Mechanical Insulation Products

1540CW

3M™ Venture Tape™ ASJ Facing Tape 1540CW is a white kraft paper, scrim and foil laminated tape coated with..

1520CW

3M™ Venture Tape™ Aluminum Foil Tape 1520CW features a nominal 1.8 mil aluminum foil coated with pressure sensitive, cold..

1525CW

3M™ Venture Tape™ FSK Facing Tape 1525CW matches FSK faced insulation board and duct. It is a foil/scrim/kraft (FSK)..

42-24 Mast-A-Fab

MAST-A-FAB® has a synthetic fiber composition that provides for significantly greater elongation, recovery, and freedom from stress breakage. Glass..

CP-25

CHIL-BRATE™ CP-25 is a water-based, fire-retardant, fibrated, asphalt-emulsion, weather barrier coating for use over insulations on above-ground installations operating..

CP-70

CHIL-JOINT® CP-70 is a non-shrinking, non-drying, economical joint sealant for applications with all types of low temperature, dual temperature..

CP-50A

CHIL-SEAL® CP-50A MV1 Coating is a white coating which is also an excellent adhesive. It brushes easily, forming a..

CP-35

CHIL-PERM® WB CP-35 is an effective, high-performance, water-based, vapor retarder coating designed for all interior and exterior, low temperature..

CP-76

CHIL-BYL® CP-76 sealant is a balanced blend of butyl polymers specifically designed for permanent flexibility in low temperature, dual..

CP-97

CP-97 is a sodium silicate-based adhesive of exceptional strength. It is non-flammable in the wet state and is incombustible..

CP-11

VI-CRYL® CP-10/11 weather barrier coating is a tough, durable and fire-resistive, water-based mastic for most types of thermal insulation..

CP-9

AK-CRYL™ CP-9 is a polymeric, water-based, weather barrier, breather type mastic. CP-9 dries to a tough flexible film that..

CP-34

CP-34 is a water-based, vapor retarder coating for use over many types of thermal insulation including polystyrene foam. It..

CP-33 Chill Out

Childers® Chil-Out™ CP-33 is a water-based coating that dries fast to form a tough, flexible film that protects insulated..

High Temp Fiberglass Tape

Woven edge tape is available in thicknesses of 1/32", 1/16", 1/8" and ¼". Widths from 1" to 12". These..

Strapping tape

Strapping tape is a natural color polyester film-backed tape, reinforced with continuous fiberglass yarn filaments. It has a very..

Vinaflex

GLT Products' Vinaflex (VN) Noise Barrier is a flexible, non-reinforced mass loaded vinyl that resists the passage of sound..

ASJ Paper

Uncoated barrier material consisting of flame resistant, high intensity white Kraft paper, fiberglass yarn reinforcement and aluminum foil lamination.

Fiberglass Blocks

Fiberglass blocks for supporting insulated piping at hanger locations. Not recommended for cold systems where fibrous insulation can retain..

Wood blocks

Block-style supports are precision-cut to various sizes. They are intended to add rigidity to pipe insulation as it crosses..

Roundup Plus™ Saddles

Roundup plus saddles "The Roundup Plus™ Saddle is an innovative pipe insulation protection shield, formed to a 180­­­° arc,..

Lo Smoke PVC

The Proto Fitting Cover System consists of one or two piece pre-molded high impact, UV resistant, LoSmoke® PVC fitting..

A300 weld

PVC LIQUID ADHESIVE (WHITE & CLEAR)

Coolwrap

The Alumaguard® Cool Wrap finish is designed for outdoor applications where high solar reflectance and emissivity are required. It..

Alumaguard

Alumaguard® All-Weather weather-proofing cladding from Polyguard Products is the only flexible insulation cladding available in the market which combines..

RG2400-LT

RG-2400 LT is a surface conversion compound utilizing mineralization technology, or the "science of Minetics"; this compound replaces the..

DP 3050

DP 3050 Water-Based Lagging Adhesive A medium viscosity, water-based, premium quality, quick-drying, low odor lagging adhesive and protective coating..

DP 3040

Design Polymerics DP-3040 is a water based, premium quality, low odor, water resistant vapor barrier coating for commercial and..

DP 1090

A smooth, solvent-based, premium quality, UL Classified, high pressure/high-velocity duct sealant for commercial and industrial supply and return air..

DP 1010

A smooth, water-based, premium quality, UL Listed, high pressure/high-velocity duct sealant for commercial and residential supply and return air..

PVC Vinyl Tapes

Speedline PVC stocks Royal Tapes, a private label brand of GLT Products. This line of vinyl tapes are a..

Solvent Weld Adhesive

PVC Cement- Fast Cure/Copolymer is a plastic solvent cement adhesivem formulated for bonding PVC plastic to itself. It is..

PVC Fitting Covers and Jacketing

Precision Fit Vessel Heads

Fabricated in a variety of materials including aluminum and stainless steel, Ideal Products precision fit gored elbows are produced..

Precision Fit Gored Elbows

Fabricated in a variety of materials including aluminum and stainless steel, Ideal Products precision fit gored elbows are produced..

Quickstraps® Fasteners

Ideal Products’ QuickStraps™ are cut-to-length straps manufactured from various types of materials including Aluminum, T304, T316, and Galvanized Steel...

WeatherJacs® Aluminum EndCaps

Ideal Products’ Aluminum WeatherJacs® end caps are produced from 1100 series Aluminum, meeting ASTM B-209 standards. 1100 aluminum alloy..

WeatherJacs® Aluminum Bevels

Ideal Products’ Aluminum WeatherJacs® bevels are produced from 1100 series Aluminum, meeting ASTM B-209 standards. 1100 aluminum alloy is..

Aluminum Large Bore WeatherJacs®

Ideal Products’ Aluminum WeatherJacs® elbows are produced in two half shell sections from 1100 series Aluminum, meeting ASTM B-209..

Aluminum Numbered WeatherJacs®

Ideal Products’ Aluminum WeatherJacs® elbows are produced in two half shell sections from 1100 series Aluminum, meeting ASTM B-209..

Deep Corrugated Sheets

Ideal Products Deep Corrugated Sheets are formed from both Aluminum and Stainless Steel metal alloys conforming to ASTM B209..

SafetyJacs® Cut & Roll Jacketing

SafetyJacs® C&R (Cut and Rolled) is Ideal Products’ newest standard for cut to length jacketing, produced from both aluminum..

Cut & Roll Jacketing

Ideal Products’ Stainless Steel Jacketing is produced from T-304 and T-316 stainless steel, meeting ASTM A-240 standards. Stainless Steel..

Stainless Steel Roll Jacketing

Ideal Products’ Stainless Steel Jacketing is produced from T-304 and T-316 stainless steel, meeting ASTM A-240 standards. Stainless Steel..

Clear Coated Aluminum Roll Jacketing with PFMB

A premium choice protection for outer surfaces of mechanical insulation systems, Ideal Products Aluminum Roll Jacketing with Polyfilm Moisture..

Aluminum Roll Jacketing with PFMB

Ideal Products Aluminum Roll Jacketing with Polyfilm Moisture Barrier (PFMB) is produced from 3003 and 3105 series aluminum, meeting..

Painted Aluminum Roll Jacketing

Painted Aluminum Roll Jacketing has a factory-applied, baked-on finish of highly durable hard film acrylic or polyester paint on..

1 # Mass Filled Vinyl

RPR Products 1 # Mass Filled Vinyl (MFV) is a lead free, limp, dense filled (barium sulfate) vinyl polymer,..

Insul-Springs

Insul-Mate™ CS-6 Compression Springs are used with 3/4” x .020, .024 or .030 SS Strapping, and provide 80 lbs/inch..

Wing Seals

RPR Products manufactures its wing seals in Stainless Steel (T304, T316), Aluminum and Galvanized Steel to match the strapping..

Stainless Steel Closed Seals

RPR manufactures Stainless Steel Closed Seals as an alternative to our popular wing seal when a stronger application is..

White Steel Strapping

White Steel Strapping is manufactured from continuous hot-dipped zinc coated steel. The bare steel is first physically and chemically..

Stainless Steel S&J Clips

Combination “S & J” Clips are manufactured from T-304 and T316 prime grade mill finish stainless steel. Dimensions are..

Cut & Clip Banding

Cut and Clip Bands are a pre-assembled ready to use product. Cut to various sizes (see chart) our product..

RPR Insul-Mate™ Strapping

​Insul-Mate™ strapping is slit from prime T304 and T316 (ASTM A-240 & ASTM C-1767), Aluminum alloy 3003, 3105 (ASTM..

Aluminum and Stainless Steel Elbow Covers

Insul-Mate™ aluminum elbow covers are precision formed and are sized to cover and weather protect insulated elbows. They are..

Two-Piece Aluminum Tee Covers & Price List

Insul-Mate™ Aluminum Tee Covers are precision formed and are sized to meet ASTM C-450 specifications.

Insul-Box™ Aluminum Siding

RPR Products manufactures Insul-Box™ Aluminum Siding from a rolled process forming a continuous pattern of 9/16” high ribs on..

7.2″ EPBL Rib Siding

RPR Products manufactures 7.2” Rib Siding from a rolled process which forms a continuous pattern of 1 1/2” high..

4″ Box Rib Industrial Siding

RPR Products manufactures 4” Box Rib from a rolled process which forms a continuous pattern of 1” high ribs..

Deep Corrugated Sheeting

RPR Products manufactures deep corrugated sheeting forming a continuous pattern of ribs on 2.67” centers. 2.67” deep corrugated can..

1 1/4″ x 1/4″ Corrugated Sheeting

RPR Products Insul-Mate™ 1 1/4” x 1/4” corrugated sheets are manufactured to form a continuous pattern of 1/4” high..

Galvanized Steel

RPR Products Insul-Mate™ Galvanized Steel Roll Jacketing is manufactured from continuous hot-dipped G90 zinc coated steel, per ASTM A-653,..

Galvalume Plus AS-60 Coated Steel

Galvalume®Plus, AZ-60 coated steel sheet and jacketing is a manufactured product consisting of, sheet steel product having a coating..

Tedlar Laminated Jacketing

RPR Products Insul-mate™ laminated jacketing consisting of Tedlar© PFV (Polyvinyl Fluoride), a highly versatile film, laminated to metals (Aluminum,..

Aluminum Alclad

RPR Products Insul-Mate™ Aluminum Alclad Sheet and Jacketing is formed from a high purity 7072 alloy surface layers metallurgically..

Painted Sheet and Jacketing

Dura-Mate 70 HPC TF is based on a unique proprietary coating system that incorporates a blend of 70% Polyvinylidine..

Stainless Steel Jacketing

RPR Products Insul-Mate™ Stainless Steel Roll Jacketing is manufactured from T304 and T316 prime grade Austenitic stainless steel with..

Aluminum Roll Jacketing

RPR Products Insul-Mate™ Aluminum Jacketing RPR Products Insul-Mate™ Aluminum Jacketing is manufactured from wrought aluminum alloy 3003 or 3105..

Aerocel LVOC

Low-VOC synthetic rubber-based contact adhesive Aeroseal LVOC (Low-VOC) contact adhesive is specially formulated for sealing Aerocel® EPDM-formulated pipe, sheet,..

Aerocel with Saniguard

Aerocel closed-cell elastometric pipe insulation with properly sized SaniGuard PVC jacketing Aerocel with SaniGuard PVC jacketing is a perfect..

Aeroseal

Solvent-based contact adhesive Aeroseal is a solvent-based contact adhesive specially formulated for sealing adjoining seams of Aerocel® tube, sheet..

Aerocel White/Gray

Aerocel® WG White/Gray Insulation Aerocel WG is our light-colored option for exposed ceilings or other applications where an unpainted,..

Aerotape

Aerotape is a flexible self-adhering foam tape made from the same high-quality EPDM rubber as Aerocel® closed-cell insulation. Ideal..

Aerocel ULP

An ultra-low water vapor permeance Aerocel ULP Ultra-Low Permeance sheet & roll insulation offers exceptionally low water transmission, and..

Protape

High-performance, zero-perm, EPDM-based, self-adhering rubber tap

Aerocel SSPT

Closed-cell elastomeric foam pipe insulation with self-seal, dual-tape closure system. Proprietary blend of non-polar EPDM rubber is key to..

Aerofix U

Light-weight, rigid pipe supports, pre-insulated with closed-cell EPDM foam rubber. Aerofix patented pipe support provide seamless, EPDM thermal performance..

Aerofit

Pre-fabricated fitting covers AeroFit fitting covers are prefabricated for fast, high-quality installation over mechanical grooved fittings, elbows, tees and..

Aerocel Sheet

Aerocel® AC Sheet & Rol Aerocel AC Sheet & Roll has everything you would want or expect from closed-cell..

Aerocel AC

Aerocel® AC Un-Slit Tube Aerocel® AC Un-slit Tube has everything you would want or expect from closed-cell pipe insulation..

Tubolit Sheet and Roll

Tubolit® Sheet and Roll closed-cell polyethylene foam insulation is used in residential, commercial and industrial plumbing projects to prevent..

Tubolit

Tube Insulation Tubolit pipe insulation is an economical thermal solution from Armacell, the makers of ArmaFlex® and the world’s..

Insuguard Multi

Multi-use, Adaptable Pipe Saddles/Shields Piping installations require different types of suspension systems, which also vary in sizes. This new..

Insuguard

Insuguard® is designed to accommodate movement of the pipes generated by thermal expansion and vibration. With its unique sliding..

InsuCover

The flexible design of InsuCover® allows it to automatically adjust to the pipe's curve. Placed on top of the..

InsuClip

Need to run an extra line using existing Clevis hangers? The lnsuClip® was designed to fill that need! With..

ArmaFix EcoLight

Pipe support brackets are a potential trouble spot for pipe insulation applications. The insulation can be crushed by the..

ArmaFlex Ultra Tube and LapSeal

Armacell is constantly looking at ways to improve our products while making safety a top priority. Our new ArmaFlex®..

ArmaFlex Ultra Sheet and Roll

Sheet and Roll Insulation Armacell is constantly looking at ways to improve our products while making safety a top..

NH ArmaFlex

NH ArmaFlex® is the halogen-free, flexible elastomeric insulation material. Specify for applications requiring protection against toxic smoke containing chlorine,..

ArmaGel HT

High-temperature Aerogel Insulation ArmaGel® HT is the next-generation of aerogel blanket technology. It’s flexible and bendable, environmentally safe and..

ArmaFlex Black LapSeal Tape

Flexible tape for ArmaFlex end seams Self-adhering 2"" tape specifically engineered to cover end joints of AP ArmaFlex Black..

AP ArmaFlex, AP ArmaFlex FS

AP ArmaFlex and AP ArmaFex FS, the world’s most recognized brand of closed-cell foam insulation, provides superior protection against..

AP ArmaFlex White LapSeal

Tube Insulation with reinforced Lap Seal AP ArmaFlex White LapSeal is specially designed for demanding grocery and refrigeration applications,..

ArmaTuff and ArmaTuff SA

ArmaTuff is the one-step installation solution for thermal mechanical insulation and UV protection of exterior ducts, tanks, vessels, large..

AP ArmaFlex SA, AP ArmaFlex FS SA

AP ArmaFlex SA (Self-Adhering) and AP ArmaFlex FS SA (Flame & Smoke/Self-Adhering) have all the same great benefits as..

AP ArmaFlex Tubes

Tube Insulation AP Armaflex, the world’s most recognized brand of closed-cell foam insulation, provides superior protection against thermal losses,..

AP ArmaFlex Black LapSeal

Tube Insulation with reinforced Lap Seal Armacell answers the demand for easy-to-install Armaflex® Black LapSeal™ in a wider range..

HT 625

HT 625 Adhesive is designed to bond ArmaFlex insulation to high-temperature pipes and tanks. This adhesive formula is based..

ArmaFlex 520

ArmaFlex® 520 Adhesive is an air-drying contact adhesive that is excellent for joining seams and butt joints of ArmaFlex..

Springs

JM offers stainless steel expansion springs and compression springs made from high-quality metal alloys to help ensure that you..

Strapping & Seals

At JM, we offer aluminum and stainless steel strapping, butt straps, and wing seals to compliment our metal jacketing..

Galvalume®

Galvalume® roll jacketing is manufactured from low carbon cold rolled steel that has a continuous hot dipped aluminum-zinc alloy..

Box Rib Aluminum Jacketing

The 4 X 1 Box Rib is designed with 1" high ribs on 4" centers, engineered for maximum structural..

Stainless Steel Elbow Covers

Stainless Steel Sure-Fit Insulation Fitting Covers are made in two, precision-formed matching halves and are sized to cover and..

Multi-Fit Aluminum Elbow Covers

Each Multi-Fit Aluminum Elbow Cover is designed to fit over 90° insulation elbows with a specific outer diameter, regardless..

Ell-Jacs™ Plus Polyfilm Lined Aluminum Elbow Covers

Ell-Jacs™ Plus Polyfilm lined Aluminum Elbow Covers are made in two, precision-formed, matching halves to cover and weatherproof insulated..

Stainless Steel Deep Corrugated Sheets

Deep Corrugated Sheets are available in Aluminum, Stainless Steel and Painted Aluminum. They provide protection for insulated equipment, towers,..

Aluminum Deep Corrugated Sheets

Aluminum Deep Corrugated Sheets are available in two nominal corrugation profiles, with bare or painted exterior surface, and in..

Muffl-Jac®

Muffl-Jac sound barrier jacketing is a sound barrier jacketing used with both fibrous and closed-cell insulation materials as a..

Painted Aluminum Roll Jacketing

Painted Aluminum Roll Jacketing has a factory-applied, baked-on finish of highly durable hard film acrylic or polyester paint on..

Stainless Steel Roll Jacketing

"Stainless Steel Roll Jacketing is manufactured from T-304 and T-316 prime grade Stainless Steels. These alloys comply with ASTM..

Aluminum Roll Jacketing

Aluminum Roll Jacketing is the premier protective outer surface for mechanical insulation systems, including pipes, vessels, and equipment.

Zeston PVC Jacketing – White and Color

Standard and heavy gauge PVC jacketing

Zeston PVC Accessories

Accessories that provide a uniform finished appearance.

Zeston 300 Series – White and Color

Colored and UV-resistant white, heavy gauge PVC

Zeston 2000 Series – Color

Colored, standard gauge PVC Fitting covers (13 different colors)

Zeston 2000 Series – White

White, standard gauge, UV-resistant, PVC fitting covers

XSPECT ISOfoam APF Board

Polyisocyanurate foam board designed to insulate rooftop ducts and HVAC equipment

Precipitator Spin-glas

Fiberglass equipment insulation designed for precipitators, baghouses, scrubbers, ducts, & breechings in power-generation plants (service temp: 850°F)

Microlite® Black & White PSK Seaming Tape

PSK Duct Wrap Seaming Tape is designed to provide a vapor barrier seal on JM’s White & Black PSK-faced..

Microlite® Black PSK Duct Wrap

Formaldehyde-free™ fiberglass, blanket-type duct wrap with a black-coated PSK facing. (Service temp: 250°F)

Microlite® White PSK Duct Wrap

Formaldehyde-free™ fiberglass, blanket-type duct wrap with a white PSK facing. (Service temp: 250°F)

HTB 26 Spin-Glas

Lightweight fiberglass blanket for industrial applications (service temp: 1000°F)

HTB 26 EQ Spin-Glas

HTB 26 Spin-Glas® is a lightweight, flexible rotary fiberglass blanket designed to provide excellent performance in high-temperature commercial, industrial..

Micro-Flex

Fiberglass, large-diameter pipe and tank wrap for industrial applications: (service temp: 850°F)

Fabrication Board

Fabrication boards are manufactured from inorganic glass fibers bonded by a thermosetting resin. Light, strong and resilient, they are..

Microlite® FSK Duct-Wrap

Formaldehyde-free® fiberglass, blanket-type duct wrap with FSK facing. (Service temp: 250°F

1000 Series Spin-Glas

Fiberglass equipment insulation for industrial applications (service temp: 850°F

800 Series Spin-Glas

Fiberglass equipment and duct insulation (service temp: 450°F)

TRYMER® 25-50 PIR

TRYMER 25-50 PIR Insulation offers the same, great thermal performance of TRYMER PIR but with a lower flame/smoke rating..

Micro-Lok Pipe Insulation

Pre-formed fiberglass pipe insulation with an ASJ jacket (service temp: 850°F)

Micro-Lok HP Ultra Pipe Insulation

Pre-formed fiberglass pipe insulation with a polycoated jacket. In-line manufacturing process (service temp: 850°F)

Micro-Lok HP Plain Pipe Insulation

Pre-formed fiberglass pipe insulation without a jacket. In-line manufacturing process (service temp: 850°F)

Micro-Lok HP Pipe Insulation

Pre-formed fiberglass pipe insulation with an ASJ jacket